Archive for 2015
[Internet] Quidway S3550启动
2015.12 5
Starting……
*************************************************************
* *
* Quidway S3610-28P BOOTROM, Version 142 *
* *
*************************************************************
Copyright(c) 1998-2008 Huawei Technologies Co., Ltd.
Creation date: Mar 12 2008, 11:17:30
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 128MB
The switch Mac is: 000F-E22F-A190
Press Ctrl-B to enter Boot Menu… 0
Auto-booting…
Decompress Image……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………OK!
Starting …
******************************************************************************
* Copyright (c) 1998-2008 Huawei Tech. Co., Ltd. All rights reserved. *
* Without the owner’s prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface aux0 is available.
Press ENTER to get started.
Login authentication
Password:
[Internet] Quidway 3550 恢复出厂设置
2015.12 5
<Quidway>dir
Directory of flash:/
0 -rw- 7668741 Aug 13 2007 17:27:48 s3500ea-vrp520-r5301.bin
1 -rw- 7716846 Apr 26 2000 12:02:48 s3500r5303.bin
2 -rw- 294476 Apr 26 2000 12:03:05 s3500eav142.btm
3 -rw- 1271 Apr 26 2000 12:24:39 vrpcfg.cfg
30861 KB total (15541 KB free)
<Quidway>reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait …
..
Configuration file in flash is cleared.
<Quidway>reboot
Start to check configuration with next startup configuration file, please wait
……
This command will reboot the device. Current configuration may be lost in next
startup if you continue. Continue? [Y/N]:y
This will reboot device. Continue? [Y/N]:y
#Apr 26 12:26:26:629 2000 Quidway DEV/1/REBOOT:
Reboot device by command.
%Apr 26 12:26:26:640 2000 Quidway DEV/4/SYSTEM REBOOT:
System is rebooting now.
[Internet] 5620模版
2015.9 28
service-port vlan 123 eth 0/1/1 multi-service user-vlan unt rx-cttr 6 tx-cttr 6
service-port vlan %d eth 0/1/%d multi-service user-vlan unt rx-cttr 6 tx-cttr 6
vlan 1134
port vlan 1134 0/0 1
int vlan 1134
ip address 10.6.5.x 255.255.255.0
quit
ip route-static 10.243.63.0 255.255.255.0 10.62.245.1
voip
ip address media 10.62.245.254 10.62.245.1
ip address signaling 10.62.245.254
quit
interface h248 248
y
if-h248 attribute mgip 10.62.245.254 mgport 2944 transfer udp
if-h248 attribute primary-mgc-ip1 10.243.63.51 primary-mgc-port 2944
if-h248 attribute secondary-mgc-ip1 10.243.63.36 secondary-mgc-port 2944
if-h248 attribute mg-media-ip1 10.62.245.254
if-h248 attribute start-negotiate-version 1
mg-software parameter 2 2
mg-software parameter 13 1
reset coldstart
y
quit
esl user
mgpstnuser batadd 0/2/1 0/2/24 248 terminalid 1
quit
protocol-8021p-pri 6 vlan 1134
snmp-agent local-engineid 800007DB0300259EBD3D9A
y
snmp-agent community read public
snmp-agent community write private
snmp-agent community read read
snmp-agent community write write
snmp-agent target-host trap-hostname xxxxc_2 address x.x.x.x udp-port 162 trap-paramsname rw
snmp-agent target-host trap-hostname 1MTU.10.254.147.251 address 10.254.147.251 udp-port 162 trap-paramsname 1MTU.10.254.147.251
snmp-agent target-host trap-hostname traphost112.25.8.50 address 112.25.8.50 udp-port 162 trap-paramsname default_para
snmp-agent target-host trap-paramsname default_para v1 securityname public
snmp-agent target-host trap-paramsname 1MTU.10.254.147.251 v1 securityname
n2000
snmp-agent trap enable standard
fax-modem parameters negomode selfswitch
interface h248 248
y
if-h248 attribute mgip 10.62.234.242 mgport 2944 transfer udp
if-h248 attribute mgcip_1 10.3.84.68 mgcport_1 2944
if-h248 attribute mgcip_2 10.3.84.5 mgcport_2 2944
if-h248 attribute mg-media-ip 10.62.234.242
if-h248 attribute start-negotiate-version 1
mg-software parameter 2 2
reset coldstart
y
service-port vlan %d eth 0/1/%d user-vlan unt rx-cttr 6 tx-cttr 6
传真：
lulizhihuibu(config)#display fax-modem parameters
—————————————————————————–
Negomode : Negotiation
Packet-interval-10ms : Disable
Rfc2198-start-mode : Disable Rfc2198SmartStartup
Vbd-codec : G.711A
Vbd-payload-type : Static
—————————————————————————–
